Öz
Üretim planlama ve kontrol (ÜPK) süreçleri, artan sistem karmaşıklığı, değişken talep koşulları ve veriye dayalı karar destek araçlarının entegrasyonu nedeniyle giderek daha fazla belirsizliğe maruz kalmaktadır. Yapay zekâ (YZ) destekli araçlar, bu belirsizliğin yönetiminde önemli kolaylıklar sağlasa da kontrolü güç yeni riskler ortaya çıkarmaktadır. Buna karşın literatürde YZ’nin ÜPK’de oluşturduğu riskler farklı kavramlar üzerinden dağınık biçimde ele alınmakta ve bu riskleri bütüncül bir şekilde değerlendiren yaklaşımlar sınırlı kalmaktadır. Bu çalışma, ÜPK uygulamalarında YZ kullanımıyla ortaya çıkabilecek riskleri Bulanık Hata Türleri ve Etkileri Analizi (Bulanık FMEA) ile değerlendirerek literatürdeki bu boşluğu gidermeyi amaçlamaktadır. Bu doğrultuda çalışma kapsamında tanımlanan dokuz risk faktörü, ÜPK alanında uzman on dört akademisyenin olasılık, şiddet ve tespit edilebilirlik boyutlarındaki dilsel değerlendirmeleri üzerinden analiz edilmiştir. Analiz sonuçlarında siber güvenlik, açıklanabilirlik eksikliği ve algoritmik önyargı ÜPK uygulamalarında YZ kullanımına ilişkin en önemli riskler olarak belirlenmiştir. Çalışma, belirsizlik altında yapılandırılmış bir risk önceliklendirme yaklaşımı sunarak YZ’nin ÜPK süreçlerine daha kontrollü ve sürdürülebilir biçimde entegre edilebilmesine yönelik yol gösterici bir çerçeve sunmaktadır.
Makale Kullanım İstatistikleri
İndirmeler
Referanslar
Bécue, A., Praça, I., & Gama, J. (2021). Artificial intelligence, cyber-threats and Industry 4.0: Challenges and opportunities. Artificial Intelligence Review, 54(5), 3849-3886. https://doi.org/10.1007/s10462-020-09942-2
Burggräf, P., Wagner, J., & Koke, B. (2018, January 12-14). Artificial intelligence in production management: A review of the current state of affairs and research trends in academia [Conference paper]. 2018 International conference on information management and processing (ICIMP), London, IEE, p. 82-88. https://doi.org/10.1109/ICIMP1.2018.8325846
Cadavid, J. P. U., Lamouri, S., Grabot, B., & Fortin, A. (2019). Machine learning in production planning and control: A review of empirical literature. IFAC-PapersOnLine, 52(13), 385-390. https://doi.org/10.1016/j.ifacol.2019.11.155
Cardiel-Ortega, J. J., & Baeza-Serrato, R. (2023). Failure mode and effect analysis with a Fuzzy Logic approach. Systems, 11(7), 348. https://doi.org/10.3390/systems11070348
Caristi, G., Barilla, D., Morabito, M., & Ferrara, M. (2025). Industrial processes and energy storage: modelling and optimising risk priority number and recovery time objective. Decisions in Economics and Finance, 1-35. https://doi.org/10.1007/s10203-025-00544-7
Carpanzano, E., & Knüttel, D. (2022). Advances in artificial intelligence methods applications in industrial control systems: Towards cognitive self-optimising manufacturing systems. Applied Sciences, 12(21), 10962. https://doi.org/10.3390/app122110962
Chang, K. H., Cheng, C. H., & Chang, Y. C. (2010). Reprioritisation of failures in a silane supply system using an intuitionistic fuzzy set ranking technique. Soft Computing, 14(3), 285-298. https://doi.org/10.1007/s00500-009-0403-7
Chen, E., Luo, X., Ma, X., Bai, X., & Luo, J. (2025). Weight-embedded fuzzy FMEA framework for enhanced risk prioritisation of offshore wind turbines. Ocean Engineering, 341, 122649. https://doi.org/10.1016/j.oceaneng.2025.122649
Colangelo, E., Fries, C., Hinrichsen, T. F., Szaller, Á., & Nick, G. (2022). Maturity model for AI in smart production planning and control system. Procedia CIRP, 107, 493-498. https://doi.org/10.1016/j.procir.2022.05.014
Dağsuyu, C., Göçmen, E., Narlı, M., & Kokangül, A. (2016). Classical and fuzzy FMEA risk analysis in a sterilisation unit. Computers & Industrial Engineering, 101, 286-294. https://doi.org/10.1016
/j.cie.2016.09.015
de Aguiar, J., Scalice, R. K., & Bond, D. (2018). Using fuzzy logic to reduce risk uncertainty in failure modes and effects analysis. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40(11), 516. https://doi.org/10.1007/s40430-018-1437-5
Del Gallo, M., Mazzuto, G., Ciarapica, F. E., & Bevilacqua, M. (2023). Artificial intelligence to solve production scheduling problems in real industrial settings: systematic literature review. Electronics, 12(23), 4732. https://doi.org/10.3390/electronics12234732
Elbasheer, M., Longo, F., Nicoletti, L., Padovano, A., Solina, V., & Vetrano, M. (2022). Applications of ML/AI for decision-intensive tasks in production planning and control. Procedia Computer Science, 200, 1903-1912. https://doi.org/10.1016/j.procs.2022.01.391
Fabrocini, F., Jian'an S. (2021). Intelligent process automation of industries using artificial intelligence and machine learning. Journal of Computing and Natural Science, 1(2), 45-56. https://doi.org/
10.53759/181X/JCNS202101009
Fries, M., Nießner, J., Ludwig, T., & Kotthaus, C. (2025). Exploring AI integration in SME production planning: design spaces and the role of workers. Computer Supported Cooperative Work (CSCW), 1-38. https://doi.org/10.1007/s10606-025-09512-6
Gabsi, A. E. H. (2024). Integrating artificial intelligence in industry 4.0: insights, challenges, and future prospects–a literature review. Annals of Operations Research, 1-28. https://doi.org/10.1007/s10479-024-06012-6
Godinho Filho, M., de Almeida, S. V. Q., Lage Junior, M., Osiro, L., Lima, B., & Callefi, M. H. (2025). A path to follow to overcome foundational barriers to the adoption of artificial intelligence within the manufacturing industry: a conceptual framework. Enterprise Information Systems, 19(1-2), 2458685. https://doi.org/10.1080/17517575.2025.2458685
González Rodríguez, G., Gonzalez-Cava, J. M., & Méndez Pérez, J. A. (2020). An intelligent decision support system for production planning based on machine learning. Journal of Intelligent Manufacturing, 31(5), 1257-1273. https://doi.org/10.1007/s10845-019-01510-y
Guo, Z., & Li, R. (2024). AI-driven risk management for sustainable enterprise development: a review of key risks. International Journal of Business and Management, 19(6), 1-82. https://doi.org/
10.5539/ijbm.v19n6p82
Gupta, G., Ghasemian, H., & Janvekar, A. A. (2021). A novel failure mode effect and criticality analysis (FMECA) using fuzzy rule-based method: A case study of industrial centrifugal pump. Engineering Failure Analysis, 123, 105305. https://doi.org/10.1016/j.engfailanal.2021.105305
Ilbahar, E., Karaşan, A., Cebi, S., & Kahraman, C. (2018). A novel approach to risk assessment for occupational health and safety using Pythagorean fuzzy AHP & fuzzy inference system. Safety Science, 103, 124-136. https://doi.org/10.1016/j.ssci.2017.10.025
Kahraman, C., Kaya, İ., & Şenvar, Ö. (2013). Healthcare failure mode and effects analysis under fuzziness. Human and Ecological Risk Assessment: An International Journal, 19(2), 538-552. https://doi.org/10.1080/10807039.2012.737753
Kunecová, J., Prester, J., Šebo, J., & Palčič, I. (2025). Why do manufacturing firms struggle with artificial intelligence?. Journal of Manufacturing Technology Management, 1-22. https://doi.org/
10.1108/JMTM-05-2025-0432
Laska, M., & Karwala, I. (2023). Artificial intelligence in the chemical industry–risks and opportunities. Zeszyty Naukowe. Organizacja i Zarządzanie/Politechnika Śląska, 172, 403-416. http://dx.doi.org/10.29119/1641-3466.2023.172.25
Mao, S., Wang, B., Tang, Y., & Qian, F. (2019). Opportunities and challenges of artificial intelligence for green manufacturing in the process industry. Engineering, 5(6), 995-1002. https://doi.org/10.1016/
j.eng.2019.08.013
Mäule, J., & Götte, G. (2025). Production planning and control in industry 4.0: overview on challenges of data-driven PPC systems. IFAC-Papers On Line, 59(10), 1253-1258. https://doi.org/10.1016/
j.ifacol.2025.09.211
Oluyisola, O. E., Sgarbossa, F., & Strandhagen, J. O. (2020). Smart production planning and control: Concept, use-cases and sustainability implications. Sustainability, 12(9), 3791. https://doi.org/10.3390/su12093791
Palinkas, L. A., Horwitz, S. M., Green, C. A., Wisdom, J. P., Duan, N., & Hoagwood, K. (2015). Purposeful sampling for qualitative data collection and analysis in mixed method implementation research. Administration and Policy in Mental Health and Mental Health Services Research, 42(5), 533-544. https://doi.org/10.1007/s10488-013-0528-y
Plathottam, S. J., Rzonca, A., Lakhnori, R., & Iloeje, C. O. (2023). A review of artificial intelligence applications in manufacturing operations. Journal of Advanced Manufacturing and Processing, 5(3), e10159. https://doi.org/10.1002/amp2.10159
Rezaee, M. J., Yousefi, S., Valipour, M., & Dehdar, M. M. (2018). Risk analysis of sequential processes in food industry integrating multi-stage fuzzy cognitive map and process failure mode and effects analysis. Computers & Industrial Engineering, 123, 325-337. https://doi.org/10.1016/j.cie.2018.07.012
Roblek, M., Kern, T., Andrašec, E. K., & Brezavšček, A. (2024). Comparative analysis of human and artificial intelligence planning in production processes. Processes, 12(10), 2300. https://doi.org/
10.3390/pr12102300
Seeger, P. M., Yahouni, Z., & Alpan, G. (2022). Literature review on using data mining in production planning and scheduling within the context of cyber physical systems. Journal of Industrial Information Integration, 28, 100371. https://doi.org/10.1016/j.jii.2022.100371
Sinha, S., & Lee, Y. M. (2024). Challenges with developing and deploying AI models and applications in industrial systems. Discover Artificial Intelligence, 4(1), 55. https://doi.org/10.1007/s44163-024-00151-2
Soltanali, H., Rohani, A., Abbaspour-Fard, M. H., Parida, A., & Farinha, J. T. (2020). Development of a risk-based maintenance decision making approach for automotive production line. International Journal of System Assurance Engineering and Management, 11(1), 236-251. https://doi.org/
10.1007/s13198-019-00927-1
Testik, O. M., & Unlu, E. T. (2023). Fuzzy FMEA in risk assessment for test and calibration laboratories. Quality and Reliability Engineering International, 39(2), 575-589. https://doi.org/10.1002/qre.3198
Toptancı, Ş., & Aktaş Potur, E. (2021). Bulanık bütünleşik çok ölçütlü karar verme modeli ile arsa seçimi. Veri Bilimi, 4(3), 106-112. https://izlik.org/JA37NG59ZR
Usuga Cadavid, J. P., Lamouri, S., Grabot, B., Pellerin, R., & Fortin, A. (2020). Machine learning applied in production planning and control: a state-of-the-art in the era of industry 4.0. Journal of Intelligent Manufacturing, 31(6), 1531-1558. https://doi.org/10.1007/s10845-019-01531-7
Valiyev, K., & Mahmudova, S. (2025). The challenges and risks of artificial intelligence and their impact on society. ScienceRise, (1), 71-77. https://doi.org/10.21303/2313-8416.2025.003834
Vyhmeister, E., Gonzalez-Castane, G., & Östbergy, P. O. (2023). Risk as a driver for AI framework development on manufacturing. AI and Ethics, 3(1), 155-174. https://doi.org/
10.1007/s43681-022-00159-3
Wan, J., Li, X., Dai, H. N., Kusiak, A., Martinez-Garcia, M., & Li, D. (2021). Artificial-intelligence-driven customised manufacturing factory: key technologies, applications, and challenges. Proceedings of the IEEE, 109(4), 377-398. https://doi.org/10.1109/JPROC.2020.3034808.
Wang, Y. M., Chin, K. S., Poon, G. K. K., & Yang, J. B. (2009). Risk evaluation in failure mode and effects analysis using fuzzy weighted geometric mean. Expert Systems with Applications, 36(2), 1195-1207. https://doi.org/10.1016/j.eswa.2007.11.028
Zhang, Z., & Chu, X. (2011). Risk prioritisation in failure mode and effects analysis under uncertainty. Expert Systems with Applications, 38(1), 206-214. https://doi.org/10.1016/j.eswa.
2010.06.046

Bu çalışma Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License ile lisanslanmıştır.
Telif Hakkı (c) 2026 Zafer Duran

